Saw this after replying in the other thread. currently looking up your recommendations. glad to have you back. thanks
Sorry for posting in multiple threads. Ceiling is definitely an option, I have my old speakers located there now and it works fine. There is plenty of room in that area (duct work). I may be able to recess and angle towards the sweet spot. See pic. I am guessing its about 16ft away from front wall. please see picture....Nolan do you still recommend the cobalt 8"? or should I try the HTM's or volts 6's? Yes i purchased (1) f12. you think i need a second?
AHHHH damn im an idiot i ment VOLT-6 im sorry dude.... either HTM-6 or Volt-6 the specs are almost identical i would lean more toward the Volt-6 with the angled flat pack due to you having to mount them off a ceiling. Volt-6 Model: Volt-6 Designer: Matt Grant Frequency Response: Ported: 65hz - 20khz (+/-3db) Atmos: 115hz - 20khz(+/-3db) Power Range: 10 - 300 watts Sensitivity: 93db - 2.83v/1m Impedance: 8 Ohm Tweeter: Denovo Audio DNA-150 Crossover Point: 2000hz Woofer: Denovo Audio CX-06 Enclosure Type: Ported or Sealed Dimensions: Ported: 8"w x 12"h x 6.75"d Angled: 8" x 12" x 8"top 5" bottom Atmos: 8.5"w x 8.5"h x 6.125"d Kit weight (no cabinet): About 11 pounds Assembled weight: About 15 pounds HTM-6 Model: The HTM-6 Designer: Matt Grant Frequency Response: 65hz - 20khz (+/-3db) Power Range: 10 - 200 watts Sensitivity: 93db - 2.83v/1m Impedance: 8 Ohm Tweeter: Denovo Audio DNA-325 Crossover Point: 1600hz Woofer: Eminence 6.5" Alphalite Enclosure Type: Ported Dimensions: 10" W x 13.5" H x 7" D Assembled weight: About 13 pounds
as for a second sub...a second sub is always better or 4 low fq is always better with MORE... your always gonna want more and dipping down in the teen Hz's your going to want it.... i run 6 Polk PSW505 3x3 and i cant get down that low and i want more.... i have a lot of power but the boxes are only tuned to get down so low...
Leaning towards the volt 6's. Emailed diysg to check on availability. I like that it has a smaller profile with the angled flat pack. Thanks for your input as always.
Morning all, Received my volt6 v2's (thanks for the suggestion Nolan) a few days ago so i started to put them together....got the flat packs this time around (angled) attempting to recessed them into my ceiling and somewhat pointing them towards where i think will be the resting place for my future seating.