Finally finished my first Vortex-15! This is a simple ported enclosure of 3.5 ft^3 tuned to 38 Hz, destined for center channel duty. [ATTACH] It...
Brinkman, I sent you a PM yesterday, not sure if you saw it yet.
They appear to have discontinued the "standard" Kappalite coaxials as well ... https://eminence.com/products/kl3012cx_8
Get the distill.io Chrome browser extension. It will check at a specified frequency and notify you when there's a change to a webpage you're...
Eminence says 11.06" for the through-hole, from the KL3012CX spec sheet (same frame). This agrees with my measurement but I haven't cut my baffles...
Overall diameter 12.38" Recess depth 7/16" (measured, frame thickness without gasket)
Erich, are there plans to do another run of Magnum 12 woofers?
In for 4 Vortex-12s!
What was the baffle width you used when voicing the crossover?
Thanks Matt. I am using hornresp, and it asks for fs in order to derive some of the parameters.
Perhaps I missed it somewhere. TS specs for the 12" were listed in post 39, however it is missing the fs. Does anyone know the fs of the 12"...
You might be able to do triangle ports at each corner... 3 5/8" (internal) on each edge would get you very close to the same port area.
Looking to buy a pair. I've been bugging Erich for too many months asking if he could find me the parts for the Maximus 12. I missed the boat on...
From the product page the woofer-mid xo frequency is 350 Hz which isn't really low enough even for surrounds.
I recall reading that there would be more Vortex-15s once he receives the next order of compression drivers.
CrossBorder Pickups. It was about $30 to bring the shipment from NY to one of their local pickup locations near Toronto. Plus the HST on the...
I believe you need to use a forwarding service. That is how I got my Vortex-15s very recently.
I'm also in for 3x Vortex-15. Can't wait to hear these things!
Separate names with a comma.
