Just screw the compression driver in. No gasketing needed. Inductors are not polarized, but they should physically oriented so they aren't all...
We should leave it to Erich or Matt to post the specs, as they normally will. There may be a reason they haven't. Plus, I'd have to unmount mine...
Ah, no, maybe David is asking about the woofer that is in the Titan and 15" mid-bass module. I don't believe those T/S params are posted anywhere.
You're correct Bob. You can also find them on the Specifications tab at...
I'm anxious to get mine up and running as well. Not sure how to break them in without bringing down the walls. ;^)
Congratulations. Nice setup.
Mixed system. I'm an old audio guy, but movies are a big thing now. I like big orchestral stuff, so couldn't go too small myself. The Fusion 6...
I don't have experience with the SH or Zaph kits, though Meniscus has been around a long time, and I used to get parts from them. High end...
See http://www.hificircuit.com/community/threads/eminence-15-subwoofer-and-midbass-information.5463/ or...
I remember the sheep's wool rage, long ago, and built some speakers using it. I can't say it will make any difference, compared to other options...
They are going to be down quite a bit at 350. Look at specs for the standard Lab15 as a guide.
Life will keep me from starting my build right away too, but I like suspense.
@squish72, with these kits, the extra money goes directly into better components, so it's almost always worth it. :^) Of course, it depends on the...
This Eminence is quite flexible. Given a very large ported box, it can still reach within a few Hz of the UM18. As a sub, you can get from ~18-65,...
@afaa, another way you can look at it is that 2 of the 15s have ~30% more surface area than a single 18, and these Eminence have ~30% less throw...
I get basically the same curve for the Lab15++ as @afaa, in different software.
@afaa, bear in mind that the design goals are key. The UM18 is meant for small, sealed, HT cabs (or crazy cars maybe), while the Lab15++ is more...
I don't know what you need to be set straight on. Just different drivers. The UM has a lower Fs and higher Qts, so will naturally go lower in a...
I remember the Dynaudio Variovent system, but only heard one system with them many years ago. It may have been an attempt to provide a smoother...
Once you plug the port, the rolloff is going to come very early for this driver without DSP. But you could run it hot, relative to your mains....
Separate names with a comma.
