Separate names with a comma.
You're on the money. A tip. Set your table saw fence to the right width for the sides top and bottom and run them all through at once. Resetting...
Cool. Why so high though?
I'm pretty sure the SEOS10 is going to be done in plastic. I've seen Erich post that he will. When... that's another question. You could use the...
You're going from Alpair 7s to these! Big sensitivity difference. Keep the alpairs though, they make a good desktop speaker. Very nice sounding....
Both are pretty similar. The Fusion 8 has a couple db on the Kahrma, as well as a beefier CD. Depends on what the cost difference means to you....
It's a good idea. If PE runs out of them quickly though, I doubt anyone would spend the time. Unless someone who already has the woofers and wants...
You'll probably get a lot more responses over on AVS. You had a lot of people recommend the Fusion 15 and I'd agree. It's a good one for your...
http://www.thx.com/consumer/home-entertainment/home-theater/surround-sound-speaker-set-up/ Scroll down to 5.1. I think you're ok. Pick a kit....
Any of the kits should do it for you. Don't you want your surrounds to the sides. Maybe the alpha 8 kit? What's your budget?
There may be alternative XO parts that could work.
I haven't heard the tempest, but I did design the Pure, and have heard quite a few SEOS implementations. The 360 is still better than the 205...
It sounds like you ought to go with a 12" design. Maybe the 2512 design or the Fusion 12. Choosing between the designs is a little bit like...
Basically right. The larger mouth/width allows it to hold directivity lower, and can match the beam width of a larger woofer. At least, that's...
You don't have to return them? I'd be worried the one with a bent frame will leak. If you're interested in selling them at a discount, I'd be...
Sometimes Bill can be slow, so what ever he says trumps me, but I'll try to answer your questions cause it's been a day. 1. The size should be...
Looks great Matt. Am I seeing things, or is the 0.22uF, 6.2ohm, 0.35mH notch shorted out in your tweeter board?
Thanks for posting that. I'm gonna pass on them. I'd have to have them sent to my parents in Minnesota and then get them later. To risky.
I'd like to get a pair, but jeez, what would I do with such big speakers. For the shop maybe? I have enough speakers to make shop speakers. That...
Where are you gonna get the EOS8 ? If you can get the EOS 8, then you can get everything you need for the Alpha 8 minion. That's a nice speaker.
H5tuu The DNA-150 is crazy good. It's sensitivity is really similar to the big boys. Once eq'ed flat it can tak some serious power. I think this...