Hey Matt, My question is about the Speedster Crossover: In Paul's descriptions on the Meniscus Audio site he notes that the ribbon tweeter is...
What a great topic for this section!! I was wondering, could a rigid foam such as urethane or blue polystyrene be used instead of the wood...
Based on your plans, maybe you should shorten your forum name to "Jammer", 'cause the "Mellow" part just doesn't seem to fit! ;) Mike
I would encourage you to toe in your baffle wall. It may not be necessary to use a toe-in angle as acute as you have drawn, however. With your...
Those turned out Great! Thank you for posting your build thread. I'm sure plenty of new builders appreciate your effort! Mike
I've been really pleased so far. They blend well with my Cheap Thrills. I used a 20 degree baffle angle for side surrounds and a 30 degree angle...
Finished enclosure, just add Duratex . . . Added pic with Duratex
Erich is putting the finishing touches on some flat packs with an angled baffle of similar design. Stay Tuned!! ;)
I'm building enclosures right now. I have wood cut for 2 surround enclosures. I plan to mount the enclosures at the wall-ceiling junction. I...
Yes. Just solder the back side where the shiny round circles are. Be sure to make a good solder connection to both the shiny pad and the wire...
I got home from work today to find a long-awaited package on my door step. Woohoo!!! ;D With great excitement I opened the package to find 2...
Ahhh, OK. Never mind. :-[ I was just going off the "Speaker Notes" section in the Karma 15 listing. I guess Erich should remove the reference...
At max output, you could probably space them as much as 400-600' apart, and still have very good sound! Check this out: MTG90 video
Hey Dave, Check with Erich and see if he has any of the 2.5 ft^3 flat packs for the Karma 15. Buy the flat pack with a Karma 15 front baffle and...
if you don't need adjustability for toe in or angle, then you could use a simple french cleat.
The trapezoid birch enclosure looks like it would work well. Just turn it upside down from the picture so that the woofer and waveguide are as...
Take a look at these: Parts Express - Tilting Flat Panel Mount
I'm really glad to hear you received the best news possible after going in for the planned surgery. You dodged a major bullet and a miserable...
Hi Erin, Here are a few of my thoughts, in no particular order: Seriously consider building your own acoustically transparent ("AT")...
Hey Wraunch, You have a good sized room. I would consider going with the Karma-12 and the EOS-8 discussed here. The surrounds are not nearly...
Separate names with a comma.
