How much of a mismatch is there between the BA750 and your Iwata 600? Do you know if there's a similar exit angle mismatch for the SEOS18?
Yes, I should PM erich and find out the model for the BA-750. Maybe it was designed from scratch. It would be nice if the 'phram measurements were...
I have the SEOS18/BA750 combo.I thoueasure the angles? How much are the angles off? Can this be rectified? I too have the TD15M. I've built the...
I noticed that the AutoTech SEOS12 is 70mm deep whereas the plastic DIY Sound Group is 88.9mm deep. Were there changes to the original design...
Finally hooked up my SEOS 18/ BA750/TD15M actively powered combo. ;D Currently I have about 25 hours on the rig and just running the drivers...
I've had no problem with it slipping or dripping. http://www.amazon.com/Mortite-45-Brown-Rope-Caulk/dp/B000CSPRAS
I've had no problem with it slipping or dripping. It's very sticky. [/size]http://www.amazon.com/Mortite-45-Brown-Rope-Caulk/dp/B000CSPRAS
I'm making progress on my SEOS 18/ TD15M/ BA 750 build. :) I'd like to fabricate rich, dark hardwood top, maybe with a bullnose, to cap it off....
Whoops I screwed up! :-[ Anybody have some suggestions on what kind of glue to repair this *uckup? In the process of tightening the bolts that...
[IMG]
I'm finishing up the bass bins for my SEOS18/TD15M/BA750. Just applying the last coats of enamel. Next I'll start building the open ended box that...
Hmm... 3.75. I should go back an check my numbers. I'm using WinISD beta for calculations and I came up with 3.069 cu ft as optimum. The Qtc is...
I'm also starting construction of SEOS18/TD15M speakers. I've been vacillating between building 3cu. ft sealed bass boxes and ~5cu.ft. vented...
You must feel that you've been reborn. Wow, what an ordeal. To go from thinking that you're at death's door to a full reprieve, I can't imagine....
The SEOS24's would probably be overkill for my 7'-9"x15'x35' room. Since I have such a low ceiling the 18 may be a better fit. I don't need the...
Thanks for the update. I'll definitely be interested in your thoughts on the difference in SQ between the SEOS24/951 and the BA/18. ...Roy
How about an update on your setup? :)
Albert, Ah... I see your're using tube amps. [/size]What kind are they?[/size] [/size]What's the reason for the extension plate in front of the...
Do you have an idea about what's causing the breakup @8-9 khz and 16-19 kHz? Thanks, Roy
Are you using the SEOS 18 as a Malcolm array now? Got some photos? :) Thanks for the damping advice. Wow, 5-6 lbs. per waveguide. I'll probably...
Separate names with a comma.
