Separate names with a comma.
The on axis frequency response of the upgraded HT-12 should actually be better then the HTM-12. Though the HTM-12 will have slightly better...
XPA-3 would be perfectly fine unless you have an absolutely massive room (10,000+cuft), even then it may be enough depending on the listening...
These crossovers would be a totally separate entity from the HT-12 kit on DIYSG. It would be difficult to substitute the crossovers because while...
Not likely, the original crossover is designed to be value oriented, fairly simple and easy to put together even without the PCB. This one is...
For current HT-12 owners; would anyone be interested in an HT-12 upgrade crossover? It involves a near complete redesign of the crossover (taking...
Those measurements are performed 4pi and the bass does roll off slightly quicker then what is to be expected with the speakers placed in a room as...
Yes a bit smaller then the HT-8, though they aren't exactly a brand new they were done around the same time as the other HT designs they just...
Added the Argos MTM.
HT-88 Measurements... This speaker isn't done but I'm reserving the post anyway.
HT-6 Measurements...
HT-8 Measurements: [ATTACH] Horizontal Off Axis: [ATTACH] Horizontal Off Axis (Normalized): [ATTACH] Horizontal Polar (normalized): [ATTACH]...
HT-10 Measurements: [ATTACH] Horizontal Off axis: [ATTACH] Horizontal off axis (normalized): [ATTACH] Horizontal polar (normalized): [ATTACH]...
HT-12 Measurements: Measurements taken outdoors at 2.83v/2m 4pi, measurements gated so resolution below 200hz is poor. I'll try to add a ground...
I recently finished up a new larger motorized speaker turntable I've been planning/building for a while: [MEDIA] So now I'm finally slowly...
Yeah foam and polyfil are going to be the easiest to find. Though fiberglass works just as well as the denim and if you are worried about the...
Separate post for this but there are a couple minor mods to the crossovers I will be posting shortly based on Erin's data to address to slight...
Here were my findings on the AVS thread for the review which is where most of the discussions took place:...
You should be fine the line with walls with the mattress topper and if you want add the poly-fil in the top portion of the cabinet behind the...
No that should not cause too many issues.
Four sealed boxes would be the easiest to integrate together. Ported subwoofers have a phase shift /rotation as they approach their tuning so...