Separate names with a comma.
Yes, the phase plug will keep you from seeing the diaphragm in many CD's. You would have to push pretty hard to poke a hole through that mesh, I...
I didn't order much for that kit. I do have baffles sitting around and will post them. If they aren't up this week, just let me know how many...
I'll have to double check which port we ended up with for the final design. We just lined the walls with some denim insulation. This model will...
I think it could work for a lot of people because studs have pretty much been spaced out the same for 100 years. The issue about depth could be...
Tux, can you get a better shot directly in front of your inwall design? I'm trying to figure out how to implement this into a kit with the...
I'll add up the parts for the Zilch kit tonight. But it's pretty expensive because the Deltalite 10" isn't a cheap woofer. He also used an L-Pad...
Any of the 10" models will be a huge step up from where you are. You won't second guess your choice after you build them and hear how nice they...
I've got 2.75" flared ports that are only 4.25" wide at the flare. They have about 5.75" worth of usable port length before the flare.
I've already got the ports. What I meant was that I could get the baffle cut for Jeff's speaker, but in the height you wanted. Recesses and...
Depending on how shallow that cabinet is, I've got some interesting curved ports that are about 2.5" in diameter and I think up to 10" long. But...
It's a very well made clone. They were hard to find, but I was on a mission! I believe they're a poured fiberglass reinforced resin. It's been...
That's the one, but those weren't buyout waveguides. The buyouts were the XT-120's from QSC, but they were used on other speakers and I'm not...
Zilch seemed to like the one he built. I'll try to find the link that talks about that particular design and post it.
I think the 10" models are a good choice for people upgrading from smaller speakers. The improvement will be huge and the price will still be...
I would start out with either of the 10" models. Set up properly, you might want to turn off the center channel and see how it sounds. You...
Which 10" models are you looking at?
Both speakers are going to be good. It really does boil down to how much you want to spend. The Tempest uses a stronger woofer, and some bigger...
The compression driver is firing about 1' 5" above the base of the speaker. So in your situation it would be about 4.5' off the ground. I think...
There are 3 designs using 12" Eminence woofers. But in this thread, the Karma-12 speaker uses the Delta 12A which is the lower priced model in a...
I thought the 'SEOS Speaker Design' category would be a good place for designs that have been proven. So if someone has an idea and it evolves...