Separate names with a comma.
Yes with the amp connected to the crossover you can connect the drivers one at a time to make sure each one produces sound.
LF C2 isn't used for this design, it was added to the PCB for future proofing for the Titan-612 but that one was never turned into a kit. It does...
And you have double checked that the amplifier is wired to IN, the woofer to LF, midrange to MF and tweeter to HF? Something else to check would...
Up to 30' - 16 awg. 30-50' - 14 awg. >50' - 12 awg. You could liekly stretch those figure a little as well and of course it doesn't hurt anything...
The shape doesn't really matter but because the foam isn't uniform thickness (unlike the denim batts) you will want to use at least 1.5". Though...
With the woofer running free air like that the sound from both sides of the cone cancel each other out, so yes the cabinet makes a very large...
[IMG] [IMG] [IMG] [IMG] Dayton TCP115-4 Woofers, ND16FA Tweeters and KAB-250 amp. I Built this over a weekend for my brother though not...
It will likely be a 2 way.
If you are only one sofa wide there won't be much change from the middle seat to the side seats. Only really an issue if you have the TV/center...
MTM design using the woofers from the HT-8 and the Square SEOS-8 waveguide (same as HTM-1010). Size will likely be around 26-28" W x 10"h x ~12"...
Yeah the R6.7 is just about perfect for the HT-8's and HT-10. One roll is enough for two of those enclosures. R13 is a little too thick for the...
The acoustic foam tiles will work if you can't easily get the denim. Poly batting can work as well if applied thick enough, I would go a little...
You obviously get the point source advantage with coaxials, since the woofer and tweeter are concentric there is no change in the time alignment...
The Vortex-15's aren't gone yet, they are just off the site at the moment. This is due to a couple of factors, very low sales being one (with...
Recreated the Flex-12 thread here.
Trying to copy things over from the now long gone AVS thread. I may need to re-upload images if they break. Let me know if everything displays...
The HT/HTM will work very well as surrounds with the Titans.
It should be more then enough for a room that size. You could probably double the dimensions and still be fine.
Yeah bass is often placement and room dependent but I would say it should be hard to find a place where you can't get good bass from the 818's...
You can certainly use both the sonic barrier and the acousta-stuf, just try and line the walls with the stuf rather then just loosely pack it in....