Separate names with a comma.
I only have two PCBs for those left and one may be spoken for but I'll likely get more made up soon.
That enclosure for the Vortex-15 is 17" wide x 44" tall x 18.5" deep. I used two 4" ports 4" long (flared ones parts express sells) on the rear...
Argos MTM Finally got around to finishing this one up. Much of what has been said about the TM applies to this one as well. The main...
The Argos design is a compact 5" two way bookshelf using the Faital Pro 5FE120 and the Beston RT002A ribbon tweeter. This small bookshelf speaker...
Using a separate subwoofer with the Vortex-12 would allow you to more easily control the bass level and dial it up or down to your preference. If...
Yes that's correct.
I measured the 15" overall depth at 8.25", but I'd round that up to 8.5" just to be safe. You can subtract a 1/2" if surface mounting.
The main advantage the Vortex-12 has over the Vortex-15 is that it is smaller. So you can use smaller baffles and smaller enclosures for equal...
What values do you have access to? It's easier and more economical to use two capacitors in parallel to get the correct value rather then placing...
That's correct, actually anywhere between 0.45 and 0.55 ft3 would work just fine.
I think that looks good.
Make sure to look at the passive radiator excursion levels as well so you don't exceed its limits as the power level you will be driving them...
What you can do is reduce the depth of the enclosure to keep the internal volume the same then use two ports around 1.5" (38mm) diameter and 5"...
It is beneficial to try and keep the driver spacing as close as possible but for the woofers with the frequency range they cover having them...
That's perfectly fine. There is more leeway to give the woofers wiggle room, I didn't intend for you to think like you have to keep everything...
Yeah you will want to make the box a little taller and spread the woofers out to fit the midrange and tweeter between them.
You should be able to get away with the standard crossover if you wanted to use them for left/right with the midrange and tweeter centered between...
Erich tests the compression drivers before packing them and makes sure the best two matched of them get marked for the left/right, no other...
Yeah that reply was referring to a earlier version of the crossover when I had the woofers wired in series. I have them wired in parallel on the...
Being used mainly for music I would go for the HT-10 instead of the HTM-10, I designed the HT series of speakers to be suited more towards mixed...