Separate names with a comma.
The Volt-6's should work well enough for that application, I'd go with those if they will look better in your space.
Everything is still in flux, I've not actually started the build yet just purchased drivers and taken some preliminary measurements. I'm planning...
Info #3
Info #2
Oh yeah and you can build a pair for less then $200! Expanding the value buster series beyond just the VBSS subwoofer this design started on a...
It should be ok.
Yes you can do that. Or cut the leads to the correct length and use a utility knife (scrape with the blade sideways) to remove the coating which...
Yeah a full width slot port 1" high and 6" long should still work out well there.
You can probably angle the HTM's a bit though it would be hard to use strong toe in without doing something to the wall itself. Maybe pull the...
1 - Distance to the front wall doesn't necessary need to be as close as possible assuming you have a proper false wall or make it full size. I've...
I'm glad you like them so much. I do still have crossover PCBs for these available. Making the cabinet back square instead of angled is no...
Crossover Assembly Example Videos: [MEDIA] [MEDIA]
Glad to hear, hope they serve you well.
It looks like it should be fine like that, the woofer magnet appears like it will be at least a couple inches away which shouldn't cause any...
For the Volt-8/10 you don't want the magnet directly above the one air core that lays flat but the magnets will have minimal impact on the other...
From what pictures I can dig up on those when searching they look far too thin and compressed or matted to be as useful for damping material. If...
They are kind of on the dense side but should still be ok.
No, the crossover for the Volt-10 is designed and tuned specifically for the compression driver that it comes with. Using either of those...
The speakers should be close to the sides of the TV for better phantom center. You do want the baffles sitting close to flush with the front of...
Hi Paul, My FRD files are kind of a mess for this design and won't be good to tinker with since they don't really accurately reflect the whole...