Separate names with a comma.
Just remembered I had the high pass set to 80hz on that WinISD model. I had intended to use a sub.
Thanks Tux, Was curious/concerned about the differences from the PE specs vs the ones in WinISD. I'll run some new models with their specs....
More attachments.
Since I purchased only the front baffle, here is a screen shots of the winisd model. I used the PE specs rather than the ones in winisd. Hope...
Yes, I would be interested in seeing the active settings for the Jack.
Hey Tux, I finally finished my first test box and I had another question on the EQ filters. Are these filters Peak, Hi Shelf, or Low Shelf?...
I noticed the Celestion is out of stock at PE. Confess up you silent builders out there....
Grills??? Strange that you mention that. I ordered these from PE to lend some visual balance....
Hello and welcome. To be honest, that is a tough budget for a full 5.1 system with the quality of speakers and cabinets that are offered here....
Warning! Crappy cell phone pic attached. You need a real name for this design. Given, she has a short and stout baffle and the alpha 8 is fo...
Yay! The waveguide, CD, and Baffles arrived today. Erich was kind enough to set me up with the slot ports, which makes for a nice look....
Congrats. Take no bow until pics are posted here.. ;D
Good stuff. Would it make sense to build a simple test box say quarter volume sized? Then measure upwards with the movable test baffle.
I'm awaiting the arrival of my Denovo and Seos, so I was just playing with the alpha and some tweeters I had on-hand. A fun way to experiment...
Hey Tux, Was the high pass filter set to 1700 in the active? I think there is a typo in the original specs.
I did not see the higher slope butterworth in the GEQ plug-in. No worries, I went ahead and downloaded the advanced. Thanks, I will likely...
Looks like the 2-way advanced is the proper one.
Arrgh, I have the 2-way GEQ plug-in. Are those settings for the 2-way advanced or 2-way + sub plug-in?
Is that the same port location as the original NS-6 placement -Or- using the NS-6 with placement port location closer to the gento's location?...
Any new thoughts on the viability of a two-way based on the NS-6? What port/driver placement issues would be encountered by just using larger...