Separate names with a comma.
I figured I would add my 1099's to the thread. Finished them a few months ago. Had to make stands to get the tweeters up to ear-height. Had plenty...
I put two sets of inputs on all my larger enclosures. One is a SpeakOn, the other is a normal binding post cup. The SpeakOn looks so small next to...
I thought I put a picture of the twins on here, guess not. [img] I moved them to my music room, mainly for protection. I have a 40x60x14 shop...
One done one to go. I tried to remove the ports after the PL had time to cure overnight, they won't budge! [img]
Got the stuff done of the rear of both enclosures today. Will try to get the drivers mounted tomorrow. Getting close! :) [img]
Well, almost ready to assemble these Vortex-15's! All veneer is on, had to wait two weeks for some more after my goof-up... :( Stained two days...
Finally hung the Volt-10's today. They sound fantastic Erich and Matt, thanks for this design! I will be putting some subwoofers on top of the...
Finally finished the Volt10's. Will hang them on the wall tomorrow. They came out pretty good. Two coats of satin paint then a light sanding, bugs...
Almost done with my Volt-10's. Built a small sealed slanted enclosure. They will be hanging on a wall in my shop, about 10 to 12 feet off the...
Yeah, Birch typically does not stain well, that's why I was curious as to what you did there. I have been using veneer on a lot of my enclosures,...
You can't just drop and run on us. What did you build the enclosure with? I'm going to say Baltic Birch and you masked-off the enclosure so you...
Been steadily working on them. Most of the veneer is on, waiting for one more sheet to arrive after I butchered one and cut it in the wrong...
Well, my version of cake decorating: [img] Yes, I did smear it all with a thin paintbrush before laying the outer baffle on. ;) And then a lot...
Thanks Matt. I am not putting any on the baffle by the woofer, just two pieces that will fit in between the braces. I glued them to the baffle...
@Matt Grant I know you said to stuff the upper portion of the enclosure by the woofer pretty heavily, do you have an example? This is the...
I have one enclosure just about ready for the front baffle for my Vortex-15. I purchased a mattress topper from Amazon and I am still waiting for...
Slow day today. Glued all the bracing for one side up by the drivers. Probably can't rotate it to do another side until tomorrow. I just don't...
Ok, three main panels on, most of the bracing is in. My question is the area around the drivers. Is what I have in the pictures attached good? I...
Started gluing today. I typically clamp everything I glue then walk away for at least 6 hours. Decided to clamp, shoot a ton of brads into the...
All panels cut and ready for gluing. Need to drill two more holes in the back panel for the switches for the MF & HF pads. Have holes for the...