Separate names with a comma.
You'd have to know the details of how the UMC-200 works. One would imagine that identical signals at same level were output on both connections,...
Yes, two is better than one (and four is better than two!). You have a few choices with wiring and amplification. Depending on the amp and the...
Going in to all this, I owned one 24" clamp and one small c-clamp. I bought 2 30" clamps and 4 36" clamps. At some point, I think I used all of...
I've seen others glue in bracing with sides all at once, but I didn't do that (for the horizontal post style brace - I did for the braces that...
Those look pretty good to me. If you've got enough clamps (6 for me, I think), I think you're ready to glue. Of course, don't glue on the...
That is the sequence I used - you've got it straight, based on what I had success with. The circular sections are what I was going to use for...
I take this back. I remember now that I was working on top of my table saw, and the edges og the cabinet hung over the edges of the table, so I...
Sorry I didn't get back to you the other day, but it looks like you're ready to get really moving. Good luck! Take your time and take plenty of...
Take your time and visualize it all coming together one board at a time. You can do it - but measure twice, cut once. And you'll need to be very...
Hey Dave, I'll add the images here for what I used, but you may not find it super-useful. Since I was building three (is that what you're...
I wasn't sure either, but I've had good results and I think I made some good choices. I built Cheap Thrills Here's what I did. I used the...
MDF is very porous. You should give it plenty of primer, or better yet sanding sealer - or so I'm told. I used two coats of sanding sealer...
Flipping them upside down is fine, IMO, but whatever you do, keep in mind that the designed lobe or whatever it's properly called for this speaker...
Well, I'm not really more qualified, but I see that it won't be a drop-in replacement. At the very least, you'll need to pad down the tweeter,...
When I was putting the second board together, I had the diagram up on the computer monitor, and the first one I built sitting on the table. I was...
Thanks for the feedback. I think I may leave that one the way it is, but I'm going to split the other boards in two - woofer and tweeter separated.
Sure does. Sorry. I realized that there was an error elsewhere on that board, so I tried to edit the picture at photobucket. How about this:...
Hey, while we're asking silly crossover building questions - I have one! Did I mess this up by putting the iron-core inductor too near the...
I've got my cabinets built, and my crossover parts that were back ordered are due in tomorrow. I've got some clean-up to do before I start...
The two pieces on the left will be glued to each side first first, flush with the front edge. That way they will provide more surface for the...