Separate names with a comma.
A: None of the above! The problem is that you cannot measure components once they are wired together in the crossover as there are alternate...
Yes I believe that was added to the new boards.
Those look great Bill, you inspired me to build a set of diffusers. Unfortunately I could not use your design due to space constraints from...
I missed your post earlier, it has been a busy week for me, are you still in the area for this weekend? I may be able to host you for a demo on...
That is sort an open ended option. There is no real plan for building them into a ceiling because every situation may be different. The easiest...
I made a quick video showing how to assemble a crossover for any of the DIYSG kits that include a PCB. [MEDIA] I may update this post and add...
It may have to be slightly shorter, the thinner you make the port or rather the higher the aspect ratio the more surface drag from the walls of...
Actually that picture is of the CA154, the original woofer that was going to be used for this design. If you looks close you can see the surround...
I recently grabbed a bunch of inexpensive 1.75" VC 1" exit compression drivers to test. Thought I would post some frequency response sweeps on...
You want the cross sectional area of the port to be roughly 32 sq in (inch or two either way does not matter much) and 5" long. So for a 16"...
That the maximum excursion limited output of a single driver at the low frequencies, shows how as tuning goes lower you loose some output above...