Separate names with a comma.
Yes though you may be able to use the DNA-360 settings from the PM you will get in a few minutes that have the JBL 2226H crossover. The TD15M...
I don't know if there is anything that would be a drop in substitute, the Celestion CDX1-1010 might work with some minor adjustments to the...
I'd say you can start with those then adjust EQ on the CD so that the response is flatter with the SEOS-15 and you may need to adjust delay on the...
What kind of design, active or passive? What if I were to say both already exist :eek: [IMG] [ATTACH] [ATTACH]
Re: Fusion-15 Assembely Info and Tips Thread reserved
Post will be updated to include more info soon. If you have questions about your Fusion-15 build feel free ask them here. [IMG] [IMG] Design...
Q: What is the depth of the Volt drivers with the DNA-150 compression driver on the back? A: The Volt-6LX with DNA-150 is 4.75" deep, or 4.375"...
Enclosure Damping I recommend lining the walls of ported Volts with 1 to 1.5" of the material of your choice leaving 3" or so around the back of...
This post will be updated as more info is added. If you have a question about a certain aspect of your Volt-6/8/10 build feel free ask them here....
You could place two or more in series or parallel to get 25 ohms if you don't have the exact value.
It may appear textbook, but loudspeaker drivers don't have textbook flat frequency response and impedance profiles, acoustic crossover is still...
It is highly unlikely the levels at 30Hz in almost any genre of music will be as high as those in the midrange so you will clip the amp before you...
Yeah these could be considered satellites in a system like that, usually I think of satellites as the little speakers included in HTiB systems....
Hi Marco, the ports are 1.5" high, 3.75" wide and 7.5" deep, converted to metric they roughly 38mm high x 95mm wide x 190mm deep.
That's a nice receiver. That enclosure is pretty big, make sure you use a decent amount of damping material in there to cut down on standing...
Yeah at least with the 2nd order HP and transfer function I was trying to get for a flat FR in the lower midrange. FR and phase are almost...
Video ;D http://youtu.be/RKIcU8kEN_s?list=UUJIlCIaSWDPq1_OxdqgwiOQ
I updated the post on the previous page with more info. http://www.diysoundgroup.com/forum/index.php?topic=345.msg3214#msg3214 Port tuning is...
I'll replace it with real wood veneer at some point which should be far more durable and hopefully look nicer too if I can get it cut nicely in...
Sorry, I meant to reply earlier but I would not had have much of an update to give. These were at the MWAF this year in the Dayton category and...