Separate names with a comma.
I have been listening to these again since picking up a DTA-100 from the PE tent sale but realized I had made one more adjustment since posting...
Usually decent results are not achieved by just swapping drivers with the same crossover, the only time this works well is if the drivers have...
Hi Brian, This is a good resource for crossover assembly: https://www.parts-express.com/resources-building-a-crossover Matt
Nice, very clean setup.
Re: Project NEXUS... Yes that and the tweeter does not have enough output to really match up with the two woofers paralleled. It does make...
Re: Project NEXUS... All that info is in the TM/MTM post, Volume should be ~0.3-0.4 cu ft. Baffle is 6.5"W x 15"H.
Re: Project NEXUS... I am not sure if the panel brace will fit unless you run it vertical in the box. The diameter of the port might be too...
Reseved
Re: Project NEXUS... The MTM does have a few advantages over the TM, Using two woofers you get 6dB more output headroom and at the same time...
That's up to Erich, I really like this design especially with the new crossover. The design using the EOS-8 waveguide fits in the same enclosure...
I played around with this crossover some after I learned a few tricks working with the DNA-150, Here is a new crossover using only 6 parts that...
Yeah that should work fine.
Re: Project NEXUS... ^ thanks Updated posts to include more info.
Re: Project NEXUS... MTMWW tower / WTMMW center design, could also be configured as a WMTMW design Edit: It comes to life at last! This design...
Re: Project NEXUS... WTMW Center Edit: Could also be built as a vertical WTMW sealed or ported [IMG] This 3 way design uses two of the Dayton...
Re: Project NEXUS... TMW 3-way design - Update, no real advantage with this design when compared with the MTM and far less cost effective.
Re: Project NEXUS... (Warning photo heavy, lots of graphs and schematics) TM/MTM designs Update 1/13/17, Enclosure and crossover redesign for...
There is no real limit on how low you can cross the DNA-360, if the levels are low enough you could run it without a crossover at all without...
Timbre matched family of Hi-Fi/HT speakers all based on the same midwoofer (Dayton DS135-8) and tweeter (ND28F-8). These designs came about from...
You could switch them but the result may not be as good as just using the SEOS-12. There is a slight difference in frequency response of the...