Separate names with a comma.
Wow, I am off today ;D I have attached a new schematic that will work with the 360/350 which closely matches the 4550 response.
Sorry saw your post then forgot to reply, The 350 should work fairly well, it won't match the final FR of the 360 exactly but it will be close...
I am glad you are doing well Bill, The timing was unfortunate as I had hoped to finally meet you during my stay with Erich but your health is...
The EOS is too deep a waveguide for a dome tweeter, you would want a shallow waveguide like the DW-62S for the best results. Too deep a waveguide...
For medium sized boxes (like this one) and larger I use the ultra touch denim myself. I try to leave plenty of room around the back of the woofer...
Well I see what you mean about the three bolt holes not having very much room to work with. I think the DNA-360 was designed for 2 bolt drivers...
I finally got around to a revamp on this design after some input from Travis and to better match the SEOSR mains for Jake (chopshop). I posted...
The BMS 4550 does have slightly lower distortion then the DNA-360 below 1.5k, but also has slightly more around and above 2k. However the TD12M...
I added the files in a zip folder and attached here.
The online calculators assume a flat frequency response and impedance while the FR and impedance of most loudspeaker drivers are not quite as...
I also suspect the woofer cap. Try disconnecting the cap and 3 ohm resistor at one of the ends and see what happens. If you have a multimeter...
Nope 650hz is the correct number for the woofer xover setting. There is some boost at 1100hz (6dB) which brings the response up before the actual...
From what I can see it looks good.
I think it looks good, connections are correct as far as I can tell.
I picked up a couple of those from the PE tent sale this year. I planned on doing something with them but who knows when I'll get around to that...
Hmm.... $1000 in speakers does not leave a lot of choices for a 7.1 system. You could possibly go with Karma-10's for your LCR and Karma-8's for...
What is your budget for the speakers? Any size limitations for surrounds (or behind the screen)? Do you want to build your own enclosures for...
I just finished up this design for countrywv he sent in the 4550 and I had a TD12M from Brain6751 who sent that over for a in wall project that...
I usually try to start with whatever gives me the best phase tracking through the crossover, but the second order with notches gives me a little...
These should be pretty close to the passive design, Woofer: 3rd order BW 650hz EQ: 500hz, -2dB, Q=0.5, 1100hz, 6dB, Q=1 1600hz, -20dB Q=3...