Separate names with a comma.
Re: "Little Mayhem" I am pretty they are almost if not identical. Erich might know better if there are any differences between them. Thanks, I...
Re: MTG-06a-OWS Thanks, They are happiest below 50-60 watts, but I am sure they would be fine (as in no driver damage) up to 100 watts with a...
Re: "Little Mayhem" Video: http://www.youtube.com/watch?v=DK0tRl51wAY&feature=youtu.be
Re: "Little Mayhem" It does not have as nice a FR on the EOS-8 as it does on the SEOS-12. At first I thought I had a bad CD and had Erich double...
Re: "Little Mayhem" Thanks, yeah its the EOS-8, but uses the DE10 clone.
Edit: Name changed from "Little Mayhem" to "Minion" in order to be a better match to the 15" B&C design "Sentinel" . Now the MTG-08 is no...
Are you doing the one with the adjustable l-pad? Either way I'm looking forward to your impressions.
Nice! There is not going to be shortage of design choices for any setup thats for sure.
Mine is 14.5"w x 25"h x 12"d external, 13 x 23.5 x 10.5 internal, which puts it at about 1.85 total and 1.6 cuft net internal volume. The...
Well it does to some extent. At the 1100hz crossover point a 3/4" offset equals about 22 degrees of phase error. Impact is greater at higher...
I think it is around 94-96dB or so, I forgot to test sensitivity outdoors. Those sweeps were not calibrated at 2.83v but they must have been...
tsloms' design uses a QSC waveguide with the DNA-360. It just so happened that it worked out great using the same crossover as the SEOS-12 design....
Thanks, the question now is whether or not this design should be made into a kit? Jeff Bagby has his two very nice 12” designs which would be...
First off I need to give thanks to Tad (tsloms) for supplying the woofer. The 12PR310 should also work with this design. This speaker uses the...
That looks really good. I liked that you got a pretty flat phase out of it. I would have thought the large acoustic offset would have been...
Re: DW-774S/DNA150 + Celestion TF0818 design/build I could have pushed the crossover lower but I was trying to keep the crossover at a point were...
I have used one, but don't own one right now. Excellent tool for getting nice straight cuts on larger pieces. Easily the best option out there...
Hi Garric33, read the text in bold on the first post. Your not the first to have suggested getting flatpacks of these done.
Re: MTG-06a-OWS I built the crossovers for these yesterday and gave them a listen. They sounded pretty bright. Today I got around to measuring...
Re: DW-774S/DNA150 + Celestion TF0818 design/build Thanks Roger, I am happy just to have contributed and without Erich none of this would have...