Separate names with a comma.
Got pretty far today. First pic is the drawing of the "B" piece template. The way I did it the biggest side of it is the inside of the horn....
I'll be able to get some work done on it tomorrow. I had solo dad duty tonight while my wife was at a writers group meeting. Ahem. Girls night...
I hope I'm wrong, the figure of merit means there are relatively few very good drivers for the application, small enough to fit where you want...
I'd probably have do a combination of both. The 6.5" Silver Flute drivers have a surround that sticks up ~5mm over the frame face. It looks like...
Yeah, I noticed that, which again led me to believe that it's an artificially enhanced artifact of the modelling. I bought several of the 6.5"...
One last thought for the night...the reason I made the comments about pressurizing space for the drivers: Both designs seem to work better with...
One last thought. My "a-ha" moment for both Tapped Horns and Synergy horns came from realizing both designs work by pressurizing a space to...
I'm glad this has been helpful to a few folks. I've learned a lot studying these and lurking. So here are my thoughts on the ripple, I've done a...
Oh, and the crappy Trendnet power line Ethernet adapter is broken. They have a poor trace that carries mains currents...it's fused on 2 of my 4...
Too small... Notice how the direction of the resonance changes. Too big and it goes up first...too small and it goes down first. Now in real...
Too Big
Okay now for some sims...been working a bunch in Horn Response by David McBean. Pretty sure I owe him a bottle of wine or 12. Fantastic...
SH60, but with directivity only down to ~550-650 Hz. Keeps it much more livable. I've seen the wall mounting thing before but that might take...
Full three way, with most likely quad 8" woofers. Drivers I'm considering so far are: Dayton PA130 Mids, Dayton Polyimide Compression tweeter,...
How the skill saw guide works. Note...make sure you can make a sacrificial cut into the surface you're working on. Make sure your work-pieces...
Zero clearance sled.
So, I didn't want to hi-jack Bill's thread regarding his Cosyne horns. His spreadsheet, plus the numerous reviews, plus my fascination with...
Bill, I'll PM you my email address. I've gotten permission from the "Sergeant at Arms" or "She Who Must Be Obeyed" to build a set of horns for...
Bill, Quick question, are Q1 and Q2 the miter angles for pieces 1 and 3 in your current spreadsheet revision? It appears that way, just want to...